=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.01.27 19:35:38 =~=~=~=~=~=~=~=~=~=~=~=


cmd: pmon

PMONitor:
---------
controls the PACTOR Monitor parameters.
First argument determines "sub command", second argument is the
(optional) parameter which can be changed:

Command             Param   Default

PMONitor Start:                    Starts PACTOR Monitor Mode.
PMONitor STop:                     Stops PACTOR Monitor Mode.
PMONitor Mode:      3-4     [3]    Defines PACTOR level to be monitored,
                                   3= Level 1-3, 4 = Level 4.
PMONitor Packets:   0-1     [0]    0= TRAFFIC only, 1= +RQ.
PMONitor Verbose:   0-1     [1]    0= No meta data, 1= +Status info.
PMONitor Hex:       0-1     [1]    Auto-Hex on 'Verbose 0': 0= Off, 1= On
PMONitor Autostart: 0-1     [0]    1= Start PMON automatically after booting.



cmd: ver

PTC-IIpro - High Performance HF/VHF/UHF Communications Controller
PACTOR - Level-III - High Speed Data Transfer Protocol
 >>> Professional / Marine Firmware V.4.0  <<<
 (C) 1994-2019  SCS GmbH & Co. KG - Germany

BIOS: Version 2.08 detected 

Packet Radio Port 1: SCS - DSP MULTI MODEM detected
Packet Radio Port 2: NO MODEM detected

cmd: help

Command key words:
==================
ACHeck     ADdlf      ADECoder   Amtor      ANotch     ANSwer     APower
AQrg       ARX        AT         AUdio      BAKup      BAUdot     BC
BEll       BKchr      BMsg       BOOT       Box        BRightn    BT
CBdetector CHeck      CHOBell    CHOchr     CLr        CMsg       Connect
CONIntegrityCONType    CSDelay    CTExt      CTrlchr    CWid       CWMoni
CWSpeed    CWTerm     CWWeight   CYcle      DAte       DD         DELete
DIR        Disconn    EQualize   ESCchr     FAX        FEc        FRee
FSKAmpl    Gate       HAYON      HCr        Help       JHOST      JHOST1
JHOST4     JHOST5     KISS       @K         LFignore   LICENSE    LIN
LIst       Listen     LOCk       LOg        LOGIn      MAil       MARk
MAXDown    MAXError   MAXSum     MAXTry     MAXUp      MOde       MONitor
MYcall     MYLevel    MYSelc     NAVtex     NUL        OFF        PACket
Phase      PDTimer    PDuplex    PMONitor   POSition   PSKAmpl    PSKTerm
PT         PTCComp    PTChn      Qrt        QRTChr     Quit       RCU
Read       RELOad     REMote     RESEt      RESTPar    RESTart    RLe
Send       SERBaud    SFile      SHow       SPAce      SQuelch    STatus
SYStest    Term       TIme       TNC        TOnes      TR         TRX
TXDelay    UMlauts    Unproto    UPDATE     USer       USOs       UTcoffset
VERIfy     Version    Write      XUser      Xcmd       SAP        LAP


For more information type: Help <CMD> (eg: H Help)

cmd: pmon

PMONitor:
---------
controls the PACTOR Monitor parameters.
First argument determines "sub command", second argument is the
(optional) parameter which can be changed:

Command             Param   Default

PMONitor Start:                    Starts PACTOR Monitor Mode.
PMONitor STop:                     Stops PACTOR Monitor Mode.
PMONitor Mode:      3-4     [3]    Defines PACTOR level to be monitored,
                                   3= Level 1-3, 4 = Level 4.
PMONitor Packets:   0-1     [0]    0= TRAFFIC only, 1= +RQ.
PMONitor Verbose:   0-1     [1]    0= No meta data, 1= +Status info.
PMONitor Hex:       0-1     [1]    Auto-Hex on 'Verbose 0': 0= Off, 1= On
PMONitor Autostart: 0-1     [0]    1= Start PMON automatically after booting.



cmd: pmon hex 3
*** BAD ARGUMENT

*** PMON HEX: 1

cmd: pmon hex 2

*** PMON HEX: 2

cmd: pmon mode 4

*** PMON MODE: 4

cmd: 

cmd: ptcc 0

*** PTC-II COMPATIBILITY MODE: 0

cmd: version

SCS P4dragon DR-7400 - Shortwave Communication Controller
Version 2.30.117_beta
Copyright (C) SCS GmbH & Co. KG, Hanau, GERMANY 1994-2019

MiniBooter Version 1.12
  Built on 20150306

Bootloader Version 1.20
  Built on 20170424

cmd: 

cmd: 

cmd: 

cmd: 

cmd: