Assorted parts for the new Hoverman DTV UHF Antenna.
Parts include:
– #6 Copper Wire (smaller is fine)
– Ceiling Light Grill (serves as mount for zigzag copper element)
– 1.5 inch OD aluminum mast – at least six feet long
– 12 inch 1/4-20 threaded rods
– DX Engineering Resin Support Blocks for 1.5 inch pipe and metal reinforcement plates
– 36 inch by 5 foot 1/2 inch galvanized fencing
– Assorted 1/4-20 hardware
– tie wraps
– 300 ohm to 75 ohm transformer
